Sherlock single and dual finger plain/roll capture device at 500 ppi by Integrated Biometrics

February 13, 2014 by Leave a comment

Sherlock single and dual finger plain/roll capture device at 500 ppi by Integrated Biometrics
Product name:

Sherlock single and dual finger plain/roll capture device at 500 ppi

Product version:

n/a

Product type:

Sensor, Integrated Product

Biometric modality/type:

Fingerprint

Biometric sample acquisition sensor type:

Light Emitting Sensor, LES film with a thin film transistor (TFT)

Intended applications:

  • Border management/Maritime/Ports/Civil ID
  • Physical Access Control
  • Time & Attendance
  • Consumer ID
  • Criminal ID/Law enforcement
  • Data access/security
  • Device access
  • Document issuance/Civil ID
  • Employment background checks/Civil ID
  • Logical Access Control/Data or device access/Data security
  • Military ID
  • Mobile ID
  • Voter registration/Civil ID

Product description:

Sherlock utilizes Integrated Biometrics patented LES film with a thin film transistor (TFT) providing the highest forensic quality roll image in the smallest and lightest form factor available on the market today. Sherlock is highly efficient and provides a 95% reduction in size and weight when compared to optical scanners.

Sherlock is provided with a full featured SDK to enable effective integration into applications requiring Certified quality images. This product meets the needs for both enrollment and verification applications common in international standards based programs. Sherlock is particularly suited to the many mobile applications where minimal size and weight have significant value. It can also cost effectively perform all requirements common in Ten Print enrollment applications.

Lightweight: designed to have minimal impact on the overall weight or structure of biometric devices

Compact: designed to easily integrate into multiple applications, allowing biometric devices to be smaller and more mobile

Durable: impact resistant and able to withstand the toughest conditions with minimal maintenance or damage due to scratching or breakdown from contaminates

Accurate: provides accurate high-resolution fingerprint scans in virtually any environment: indirect or direct sunlight, a factory, with dirty or clean fingers

Secure: live finger detection Efficient: LES fingerprint sensor is not easily confused by foreign matter and contaminants, allowing the sensor surface and the biometric access control solution to be essentially maintenance-free. Requires no cleaning for latent prints.

List of applied/complied/received standards, certification programs, awards, or conducted independent testing, monitoring, reporting, and reviews:

Sherlock: FBI Appendix F Certification

Sherlock: FBI PIV Certification

GSA FIPS 201 Certified

Availability of Return on Investment (ROI) analysis and calculator:

n/a

Selected list of use cases and customers:

Company:

Integrated Biometrics

Company business type/role:

Sensor manufacturer, Algorithm developer, Device manufacturer

Geographical reach in terms of sales and support:

n/a

Selected list of partners/resellers/distributors:

n/a

Company website:

http://www.integratedbiometrics.com

Product website:

http://www.integratedbiometrics.com/fingerprint-sensors/sherlock/

Social Media channels:

LinkedIn , News , Youtube Channel

Product demo, case study, or any other video or audio link:

Advertisements

Filed under Border management/Maritime/Ports/Civil ID, Consumer ID, Criminal ID/Law Enforcement, Data access/security, Device access, Document issuance/Civil ID, Employment background checks/Civil ID, Fingerprint, Integrated Product, Logical Access Control/Data or device access/Data security, Military ID, Mobile ID, Other application type, Physical Access Control, Sensor, Time & Attendance, Voter registration/Civil ID

IriShield™ Series by IriTech, Inc.

August 5, 2013 by Leave a comment

IriTech IriShield Biometric Products Info
Product name:

IriShield™ Series

Product version:

IriShield-USB MO 2120 (comes in 3 packages: Chip and camera, Module, Encased device AND diverse interfaces: IriShield-USB, IriShield-UART)

Also available as: IriShield-USB BK 2121U, IriShield-USB BO 2121, IriShield-USB MK 2120U

Product type:

Biometric Capture Device

Biometric modality/type:

Iris

Biometric sample acquisition sensor type:

Camera

Intended applications:

  • Border management / Maritime / Ports / Civil ID
  • Consumer ID
  • Criminal ID / Law Enforcement
  • Document issuance / Civil ID
  • Employment background checks / Civil ID
  • Logical Access Control / Data or device access / Data security
  • Military ID
  • Mobile ID
  • Physical Access Control
  • Time and Attendance
  • Voter registration / Civil ID
  • Other

Product description:

IriShield™ Series is an ultra-compact, auto-capture camera module, complete with onboard iris recognition and a PKI-based security infrastructure that ensures complete data security.

With its low cost, IriShield™ Series will lower the entry barrier to deploying iris biometric solutions in all sorts of applications.

Product Offering

IriShield series are offered in three packages with diverse options to developers and manufacturers for integration with various applications.

Packages

  • Chip & Camera: Essential Module components (CPU, firmware, camera) are offered separately as the most cost-effective option for those with sophisticated  manufacturing capability. Design and implementation assistance are available with this package.
  • Module: Offered as a ready-to-integrate hardware component with all the drudgeries of hardware design and manufacturing already completed. Create your own branded product by adding your own case.
  • Encased Device: Ready-to-use product. Ideal for software developers or value added resellers to develop application system. No need to develop any hardware.

Optional Features

  • Auto-Capture
  • Auto-Capture & Template Generation
  • Auto-Capture, Template Generation & Matching

Models

IriShield series support three models to meet common interface connections of various security devices/systems.

  • IriShield-USB: Data communication to the host via USB interface; power is also supplied through the USB cable.
  • IriShield-UART: Data communication through the serial(UART) interface; best suited to small systems like door lock.

Features:

  • Secure on-board processing

– All key functions like iris capture, iris recognition, key generation, encryption, and digital signature are done on-board in a secure environment.

  • Tamper-proof
  • Secure data & communication

– Each IriShield device has its own 2048 bit RSA key securely generated on-board for encryption and digital signature.

– Key device in IriTech’s secure end-to-end biometric solution.

– OTP/Password/Timestamp can be seamlessly integrated with IriShield.

  • Ultra-compact, light weight
  •  Low power consumption
  •  Cost effective

– Most economical for projects of any size.

  •  Various OS supported

– Windows 32bit, Linux 32bit, Embedded Linux, and Android.

List of applied/complied/received standards, certification programs, awards, or conducted independent testing, monitoring, reporting, and reviews:

  • Image format: ISO Standard 19794-6 (2005 & 2011), (640 x 480 Pixels, 8 bit Grayscale), full support of K1, K2, K3, K7
  • Eye safety standard (IEC 62471:2006-07)
  • RoHS
  • FCC-Class A (Encased model only)
  • IP54 (Encased model only)
  • Upside down protection (Encased model only)
  • PKI (2048-bit) and AES (256-bit);
  • X509 Certificate,
  • PFX/PKCS#12 Certificate,
  • RSA key pair generated on-board

Availability of Return on Investment (ROI) analysis and calculator:

–

Selected list of use cases and customers:

http://iritech.com/news-events/Applications%20of%20Biometrics

Company:

IriTech Inc.

Company business type/role:

Sensor manufacturer, Algorithm developer, Device manufacturer

Geographical reach in terms of sales and support:

Global

Selected list of partners/resellers/distributors:

Company website:

http://www.iritech.com

Product website:

http://www.iritech.com/products/hardware/irishield™-series

Social Media channels:

LinkedIn , News , Youtube Channel

Product demo, case study, or any other video or audio link:

Filed under Border management/Maritime/Ports/Civil ID, Consumer ID, Criminal ID/Law Enforcement, Data access/security, Device access, Document issuance/Civil ID, Employment background checks/Civil ID, Integrated Product, Iris, Logical Access Control/Data or device access/Data security, Military ID, Mobile ID, Other application type, Physical Access Control, Sensor, Time & Attendance, Voter registration/Civil ID

Speed Capture G3 by Speed Identity

September 6, 2012 by Leave a comment

Speed Capture G3

Product name:

Speed Capture G3

Product version:

SCG1500
SCG1600
SCG1200
SCG1100
SCG1400

Product type:

Integrated Product, Biometric Capture Device

Biometric modality/type:

2D Face, Fingerprint, Signature

Biometric sample acquisition sensor type:

2D Camera (Integrated industrial-grade camera), Optional fingerprint device (2×1 fingerprint reader), Optional fingerprint device, 1×4 fingerprint reader for visas and other applications requiring 10 finger- prints, Integrated signature capture pad with user- friendly, pen-like stylus. Configurations (Tailor-made): two-and three-dimensional facial scanner, fingerprint and iris reading systems.

Intended applications/markets:

  • Border management/Maritime/Ports/Civil ID
  • Document issuance/Civil ID

Product description:

Speed Capture G3 is the 3rd generation integrated biometric data enrollment system for e-passports, visas, driving licenses and ID documents where security, reliability and useability are critical.

All-in-one Solution
The Speed Capture G3 is a complete solution for capturing biographic and biometric data including face photography, fingerprints and signature, in an all-digital workflow. The system is prepared for Iris-capture and its modular design allows for integration of a wide range of input sensors and quality-control software. Full interactivity and self-service mode is possible through the integrated touch screen and built-in audio hardware support.

High Quality Biometric Data
The Speed Capture API includes quality-check software to ensure ICAO and ISO complian- ce for face photography and NIST/BMS-compliance for fingerprints. In a typical applica- tion, fingerprint, signature and face photo files are retrieved by the host system from the G3 after the quality check algorithms have been applied, so that all data leaving the G3 match pre-defined levels of quality.

Secure Intact Digital Chain
In a robust workflow set-up, the biometric data, captured on the G3 is matched with the applicant so that biometric data is securely tied to the applicant, with no possibility of tampering with the data. The concept of “Live Enrollment” is critical, as any files from out- side sources, such as print photographs, may have been manipulated. The efficient and secure all-digital workflow for biometric ID documents ensures an unbroken digital chain.

Software and Integration
The Speed Capture API software pack controls all input sensors, quality parameters and file formats and the entire system integrates easily with the host application of national authorities and corporations using standard programming interfaces. The software platform is based on a secure web service.

List of applied/complied/received standards, certification programs, awards, or conducted independent testing, monitoring, reporting, and reviews:

ICAO enrollment requirements:

  • ISO-19794-5 for biometric facial image standardization
  • ISO-19794-4 for fingerprints standardization
  • NIST/BMS-compliance for fingerprints
  • Visa Information System (VIS)

Availability of Return on Investment (ROI) analysis and calculator:

n/a

Selected list of use cases and customers:

Company:

Speed Identity

Company business type/role:

Device manufacturer, System Integrator

Geographical reach in terms of sales and support:

worldwide distribution

Selected list of partners/resellers/distributors:

–

Company website:

www.speed-identity.com

Product website:

www.speed-identity.com

Social Media channels:

Youtube , LinkedIn

Product demo, case study, or any other video or audio link:

Filed under 2D face, Biometric Capture Device, Border management/Maritime/Ports/Civil ID, Document issuance/Civil ID, Fingerprint, Integrated Product, Signature

MULTIBIO 700 STANDALONE BIOMETRIC READER by ZKAccess

April 23, 2012 by Leave a comment

MULTIBIO 700 STANDALONE BIOMETRIC READER by ZKAccess
Product name:

MULTIBIO 700 STANDALONE BIOMETRIC READER

Product version:

Face Matching algorithm  version 7.0 and fingerprint matching algorithm version 10.0

Product type:

Integrated Product (Vendor specified: Standalone Reader Controller for Access Control)

Biometric modality/type:

Fingerprint, Face

Biometric sample acquisition sensor type:

Optical fingerprint sensor, Infrared camera

Intended applications:

  • Physical Access Control
  • Time & Attendance

Product description:

Reliable, durable and highly accurate ZK fingerprint sensor with ver. 10 algorithm provides less than 1.5 second user recognition. RS485 mode of communication is used by the sensor to communicate with the master reader or the inBio panel. The Multibio works without a computer. Complete setup and programming can be done via keypads and embedded firmware.

Large Monochrome LCD display for rich user experience. Audio-Visual Indication for acceptance and rejection of valid/invalid fingerprints. Can store up to 2000 fingerprints, 400 faces and 10000 card templates and 100,000 transactions. The data can be backed up to a USB flash drive and can also be transferred to another reader in the absence of computer connectivity. Relay Outputs for electric lock and alarm.

Inputs for door status sensor and exit switch. Supports multiple timezones and personnel groups for programming valid entry zones. The Alarm will be triggered when the tamper switch is activated. Internal Proximity Card or Mifare Card reader allows triple factor authentication for access control.

Features:

  • Elegant ergonomic German-designed enclosure
  • 3” TFT color touch-screen display
  • Supports 50 time zones, 99 groups and 10 unlock combinations for access control
  • Contact relays for door locks, exit button, alarms, bell, etc
  • Stores 2000 fingerprints and 400 faces and matches with superior accuracy
  • Infrared light source enables face detection and matching in dimly lit environments
  • Contactless 1-second employee recognition
  • Operates stand-alone or can be interfaced with third party access control panel using Wiegand Interface
  • Built-in TCP/IP, Serial and USB interfaces
  • A voice & visual indication for acceptance & rejection of valid & invalid fingerprints/faces
  • SDK available for OEM customers and software developers
  • Multi-language support

List of applied/complied/received standards, certification programs, awards, or conducted independent testing, monitoring, reporting, and reviews:

Communication

  • RS485
  • RS232
  • TCP/IP
  • USB-Host

Optional Function

  • Mifare

Availability of Return on Investment (ROI) analysis and calculator:

n/a

Selected list of use cases and customers:

n/a

Company:

ZKAccess, A division of ZKTechnology

Company business type/role:

Device manufacturer, Algorithm developer

Geographical reach in terms of sales and support:

ZKTechnology has over 1,250 employees at its R&D/Manufacturing facility in China along with branch offices/subsidairies in USA, Spain, Brazil, South Africa, Dubai, Indonesia, Mexico, Thailand and India.

Selected list of partners/resellers/distributors:

See here

Company website:

http://www.zkaccess.com

Product website:

MULTIBIO 700 STANDALONE BIOMETRIC READER

Social Media channels:

LinkedIn , News , Youtube Channel

Product demo, case study, or any other video or audio link:

Filed under 2D face, Fingerprint, Integrated Product, Physical Access Control, Time & Attendance

HandPunch® GT-400 by Ingersoll-Rand Security Technologies

December 22, 2011 by Leave a comment


Product name:

HandPunch® GT-400

Product version:

GT-400 (standard model w/ Ethernet)

Product type:

Integrated Product

Biometric modality/type:

Hand Geometry

Biometric sample acquisition sensor type:

n/a

Intended applications:

  • Time and Attendance
  • Vendor specified: Manufacturing, Grocery, Healthcare, Hospitality, Restaurants, Retail

Product description:

The HandPunch™ GT-400 is one of the most important solutions for effective workforce management. With the HandPunch you can improve record-keeping accuracy, mitigate risk, increase employee productivity and provide greater peace of mind for yourself and your employees. Coupled with a software provider, the HandPunch GT-400 delivers tangible benefits every day. In fact, when used properly the initial cost of the HandPunch GT-400 can be paid back in less than nine months.
  • Increased up-time – upgrade remotely by downloading new firmware and application functionality through an Ethernet connection; there is no need to remove the device from the wall or disrupt productivity.
  • Improved serviceability – remote diagnostic capability allows for troubleshooting maintenance without removing the device from the wall.
  • Employee self-service kiosk – programmable, ATM-style kiosk has soft keys and a large display field that allows information like lists and personal messages to be displayed.
  • Real-time communication – access information in real time with push technology.
  • Open architecture design – Linux-based operating system ensures programming flexibility.
  • Antimicrobial protection – antimicrobial coating embedded in the platen, keypad and plastics inhibits the growth of bacteria.
How the HandPunch Works The HandPunch GT-400 uses the size and shape of each employee’s hand for verification, so it’s fast, easy and efficient. The user’s hand can still be read even if it’s dirt, wet, greasy, dusty, swollen or dry, making it an effective solution in a wide range of applications. The HandPunch also provides a host of benefits for your business.
  • Reduced payroll and administration costs – because punch-in and punch-out data is read and recorded at the point of entry, translation of timecards is eliminated, along with any discrepancies between time worked and time reported.
  • Eliminates time fraud – since every user’s hand is unique, the HandPunch eliminates costly and fraudulent “buddy punching.”
  • More productive and informed workforce – verification takes place in about one second; during that process the communication panel can display relevant messages to employees, promoting communication with management.

List of applied/complied/received standards, certification programs, awards, or conducted independent testing, monitoring, reporting, and reviews:

n/a

Availability of Return on Investment (ROI) analysis and calculator:

n/a

Selected list of use cases and customers:

Company:

Ingersoll-Rand Security Technologies

Company business type/role:

Sensor manufacturer, Algorithm developer, Device manufacturer

Geographical reach in terms of sales and support:

n/a

Selected list of partners/resellers/distributors:

n/a

Company website:

http://w3.securitytechnologies.com/Products/biometrics/Pages/default.aspx

Product website:

http://w3.securitytechnologies.com/products/biometrics/time_attendance/HandPunch/Pages/details.aspx?InfoID=17

Social Media channels:

LinkedIn , News , Youtube Channel

Product demo, case study, or any other video or audio link:

HandPunch GT-400 installation video

Filed under Hand geometry, Integrated Product, Time & Attendance

HandKey® II Biometric Hand Geometry Reader by Ingersoll-Rand Security Technologies

December 22, 2011 by 1 Comment


Product name:

HandKey 2

Product version:

n/a

Product type:

Integrated Product

Biometric modality/type:

Hand Geometry

Biometric sample acquisition sensor type:

Camera

Intended applications:

  • Physical Access Control
  • Time & Attendance
  • Vendor specified: Critical Infrastructure Transportation hubs, Data centers, Construction facilities, Utility plants, Prisons, Military installations, Healthcare Facilities, Financial Institutions, Education Residence halls, Recreational facilities, Dining halls, Computer labs, Hospitality Lodging, Entertainment, Commercial Buildings, Corporate campuses

Product description:

The Schlage HandKey-2 uses hand geometry to identify each user. Adding and deleting users is easy and the system can be expanded to support more users as your needs grow.
  • Supports multiple credentials, including proximity, magnetic stripe, bar code, iClass and MIFARE.
  • Field-installable Ethernet module.
  • Outdoor enclosures available.
  • Field-upgradeable and expandable memory options to support from 512 to 240,000 users.
  • Three user-definable outputs to connect other devices like audible or silent alarms, door locks or lighting systems.
  • Specially formulated antimicrobial coating on the platen inhibits the growth of bacteria, mold and mildew, limiting the spread of germs. Coating lasts for the life of the product.
  • Blue hand outline on the platen facilitates easy enrollment and reduces errors during verification.

List of applied/complied/received standards, certification programs, awards, or conducted independent testing, monitoring, reporting, and reviews:

n/a

Availability of Return on Investment (ROI) analysis and calculator:

n/a

Selected list of use cases and customers:

Company:

Ingersoll-Rand Security Technologies

Company business type/role:

Sensor manufacturer, Algorithm developer, Device manufacturer

Geographical reach in terms of sales and support:

n/a

Selected list of partners/resellers/distributors:

n/a

Company website:

http://w3.securitytechnologies.com/Products/biometrics/Pages/default.aspx

Product website:

http://w3.securitytechnologies.com/products/biometrics/access_control/handkey/Pages/details.aspx?InfoID=6

Social Media channels:

LinkedIn , News , Youtube Channel

Product demo, case study, or any other video or audio link:

Filed under Hand geometry, Integrated Product, Physical Access Control, Time & Attendance

BIMS by AFIS and Biometrics Consulting Inc.

November 1, 2011 by Leave a comment

Product name:

Biometrics Identification on the Move System™ (BIMS)

Product version:

BIMS 1.20 release

Product type:

Integrated Product

Biometric modality/type:

Multi-modal

Biometric sample acquisition sensor type:

BIMS does not use any specialized biometric sensors. Type and number of sensors depend on the particular use case and application including:

  • Multiple COTS DSLR cameras;
  • Combined DSLR and Flash photography for non-contact fingerprint and palmprint capture;
  • First in industry combined Microsoft XBox Kinect Sensor with high resolution DSLR camera for face and iris capture.

Intended applications/markets:

  • Border management / Maritime / Ports / Civil ID
  • Consumer ID
  • Logical Access Control/Data or device access/Data security
  • Physical Access Control
  • Military ID
  • Surveillance
  • Time & Attendance
  • Other (Specialized applications/markets): Automated Border Clearance without the expensive e-gates; Multiple Biometric Secure Physical and Logical Access control; Next generation Surveillance Camera Analytics for watch-list checking and terrorist tracking; Commercial application for automated customer recognition, service and care; Automated time and attendance application for businesses;
    Automated time and attendance for Education and day-care facilities;

Product description:

BIMS is a complete turnkey solution with the biometric sensors, hardware and software components to provide detection, tracking and identification of individual in an entrance or operational environment.

BIMS is an Identification System. Built with multiple commercial off the shelf cameras for capturing fingerprints, iris and face photos in an entrance and/or hallway with the software to process the information and provide detection, tracking and identification of the individuals entering the portal.

The key innovations include:

  • real-time processing of massive sensor information;
  • search and match in large background database,
  • incremental identification based on the progressive data capture in split seconds while the subject walking through the portal; and
  • multiple biometric fusion for highly reliable identification.

List of applied/complied/received standards, certification programs, awards, or conducted independent testing, monitoring, reporting, and reviews:

All the biometric samples (fingerprints, face and Iris) are in ANSI/NIST-ITL 2007 biometrics exchange record format standard and readily available for export to any other systems. The backend BIMS services receive and processes ANSI/NIST records for populating the search databases.

Availability of Return on Investment (ROI) analysis and calculator:

The business process automation savings calculator is available and configurable for various use cases and applications.

Selected list of use cases and customers:

US Department of Homeland Security Science and technology
University of California Lab access

Company:

AFIS and Biometrics Consulting Inc.

Company business type/role:

System Integrator, Algorithm developer

Geographical reach in terms of sales and support:

–

Selected list of partners/resellers/distributors:

Optimum Biometric Labs (BioUptime)

Company website:

http://www.afisandbiometrics.com

Product website:

http://www.afisandbiometrics.com

Social Media channels:

LinkedIn

Product demo, case study, or any other video or audio link:

Filed under Border management/Maritime/Ports/Civil ID, Consumer ID, Employment background checks/Civil ID, Integrated Product, Logical Access Control/Data or device access/Data security, Military ID, Multi-biometrics, Multi-modal, Multi-sensorial, Other application type, Physical Access Control, Surveillance, Time & Attendance

← Older posts

%d bloggers like this: